Welcome to Gavilion

Login / Register

Browse Categories

Longitudinal conveyor TS 5

Conveyor units are available in 2 load classes and 3 different system widths (455, 650, 845 mm) for longitudinal conveyors, as well as a further width for transverse conveyors (1040 mm). All rollers in the conveyor unit are driven by a king shaft in the respective drive unit. The king shaft is located behind a protective cover below the transport level; the workpiece pallet can pass over the king shaft. The conveyor units have a symmetrical design and there is no drive side selection. The rollers are driven by bevel wheels; a friction clutch protects the drive during accumulation operation. Additional versions of the products in this category are available on request from our modification department (COS@boschrexroth.de).

Conveyor units with open center

Conveyor units with open center

Specifications

Required accessories AS 5/... drive unit,SZ 5/... leg set,Connection Kits
Roller material [TR] 1 = Stahl, verzinkt,2 = Stahl, nitrocarburiert
Length min [L min] 4160 mm
Workpiece pallet length [lWT] 4556508451040

Downloads

End plates for conveyor unit with open center

End plates for conveyor unit with open center

Specifications

Length 17 mm, 43 mm, 45 mm, 75 mm, 90 mm, 108 mm, 135 mm, 100150 mm
Material Aluminum, anodized, PP, Steel, galvanized
Height 14 mm, 20.5 mm, 73 mm, 184.5 mm
Width 2 mm, 14 mm, 60 mm, 90 mm

Downloads

Data Sheet

Protective covers for conveyor unit with open center

Protective covers for conveyor unit with open center

Specifications

Height 9 mm, 20.5 mm
Material Steel, galvanized
Length 17 mm, 84 mm, 147 mm, 214 mm
Width 14 mm, 60 mm

Downloads

Data Sheet

Protective covers for transitions

Protective covers for transitions

Specifications

Length 17…100150 mm
Material PP, Steel, galvanized
Height 3 mm, 13 mm, 14 mm, 20 mm, 20.5 mm, 73 mm
Width 14…163.5 mm

Downloads

Data Sheet

Connection kits longitudinal conveyor

Connection kits longitudinal conveyor

Specifications

Material Steel, galvanized, Steel, galvanized/brass
Width 20 mm, 30 mm, 48 mm, 59 mm, 80 mm, 145 mm
Height 2 mm, 20 mm, 48 mm
Packaging unit 1, 10

Downloads

Data Sheet

Protective covers for conveyor unit with full rollers

Protective covers for conveyor unit with full rollers

Specifications

Length 17 mm, 460 mm, 655 mm, 850 mm
Width 14 mm, 84 mm, 117 mm, 149 mm
Material Steel, galvanized
Height 20 mm, 20.5 mm

Downloads

Data Sheet

Conveyor units with split rollers

Conveyor units with split rollers

Specifications

Length min [L min] 4160 mm
Lateral guide material [LG] 1 = Stahl,2 = Kunststoff,3 = Aluminium
Length max [l max] 390 mm
Roller material [TR] 1 = Stahl, verzinkt,2 = Stahl, nitrocarburiert

Downloads

End plates for conveyor unit with split rollers

End plates for conveyor unit with split rollers

Specifications

Length 17 mm, 32 mm, 45 mm, 460 mm, 655 mm, 850 mm, 1169 mm, 100150 mm
Material PP, Steel, galvanized
Height 2 mm, 14 mm, 19 mm, 20.5 mm, 65.5 mm, 66 mm, 73 mm, 98 mm
Width 14 mm, 35 mm, 47 mm, 72.3 mm, 74 mm, 90 mm, 180 mm

Downloads

Data Sheet

Protective covers for conveyor unit with split rollers

Protective covers for conveyor unit with split rollers

Specifications

Material Steel, galvanized
Width 14…260 mm
Height 20 mm, 20.5 mm
Length 17 mm, 460 mm, 655 mm, 850 mm, 1040 mm

Downloads

Data Sheet

Conveyor units with full rollers

Conveyor units with full rollers

Specifications

Roller material [TR] 1 = Stahl, verzinkt,2 = Stahl, nitrocarburiert
Required accessories AS 5/... drive unit,SZ 5/... leg set,Connection Kits
Length min [L min] 4160 mm
Delivery information Ready-to-install

Downloads

End plates for conveyor unit with full rollers

End plates for conveyor unit with full rollers

Specifications

Length 17 mm, 32 mm, 45 mm, 460 mm, 655 mm, 850 mm, 1169 mm, 100150 mm
Material PP, Steel, galvanized
Width 14 mm, 35 mm, 44 mm, 74 mm, 90 mm, 109 mm, 180 mm
Height 2 mm, 14 mm, 19 mm, 20.5 mm, 44 mm, 72.3 mm, 73 mm, 76 mm

Downloads

Data Sheet