ISO-10303-21;
HEADER;
FILE_DESCRIPTION( ('AP242 STEP file','CAx-IF Rec.Pracs.---Geometric and Assembly Validation Properties---4.4--2015-08-17','CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufacturing Information (PMI)---4.0.6---2019-08-19','CAx-IF Rec.Pracs.---User Defined Attributes---1.5---2016-08-15','CAx-IF Rec.Pracs.---3D Tessellated Geometry---1.0---2015-12-17','CAx-IF Rec.Pracs.---Model Styling and Organization---1.6---2018-08-17'), '2;1');
FILE_NAME( 'IDX_XAS4-WL-U005.stp', '2021-11-25T15:12:54+01:00', (''), (''), 'ST-DEVELOPER v18.1', 'Elysium Co. Ltd. STEP Translator v8.3.0.0', '');
FILE_SCHEMA (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 1 1 4 }'));
ENDSEC;
DATA;
#21572=PRODUCT_DEFINITION_SHAPE('','RA95981450_extract Shape',#21585);
#21573=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#21574)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#21583,#21578,#21575)) REPRESENTATION_CONTEXT('3','3D') );
#21574=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#21583,'point coincidence tolerance','maximum model space distance between geometric entities at asserted connectivities');
#21575=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#21576=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#21577=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925199433),#21576);
#21578=( CONVERSION_BASED_UNIT('DEGREE',#21577) NAMED_UNIT(#21582) PLANE_ANGLE_UNIT() );
#21579=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
#21580=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.),#21579);
#21581=DIMENSIONAL_EXPONENTS(1.,0.,0.,0.,0.,0.,0.);
#21582=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
#21583=( CONVERSION_BASED_UNIT('MILLIMETRE',#21580) LENGTH_UNIT() NAMED_UNIT(#21581) );
#21584=PRODUCT_DEFINITION_CONTEXT('part definition',#21593,'design');
#21585=PRODUCT_DEFINITION('design','',#21586,#21584);
#21586=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#21591,.NOT_KNOWN.);
#21588=PRODUCT_CATEGORY('part','');
#21589=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#21591));
#21590=PRODUCT_CONTEXT('',#21593,'mechanical');
#21591=PRODUCT('RA95981450_extract','RA95981450_extract','',(#21590));
#21592=APPLICATION_PROTOCOL_DEFINITION('international standard','ap242_managed_model_based_3d_engineering_mim_lf',2011,#21593);
#21593=APPLICATION_CONTEXT('managed model based 3d engineering');
ENDSEC;
END-ISO-10303-21;